USB 2.0 To Type C Fast Charging Flat USB Data Cable with Digital LCD Display
1. The no-load USB data cable is plugged into the power supply, and the 2 contents of time and current are displayed in a cycle of 3 seconds.
2. When no load is inserted, the display enters the standby state after 60 seconds by default. When there is load access, the display automatically wakes up.
3. Plug the fast data cable into the power supply and connect to the load. USB self-test current, time, voltage three contents are displayed in 3 seconds cycle, the system defaults to 5 hours power off.
4. The display of current and voltage depends on the current and voltage of the mobile phone during real-time charging.
5, Timing adjustment: press the back (or side) button, there are 10 gear adjustment, H01 represents it will turn off the power after 1 hour, H02 represents it will turn off the power after 2 hours, and so on. Press the button once, the charging time is increased by 1 hour, the button is pressed 2 times continuously, and the charging time is reduced by 1 hour.
6, USB memory function: When the charging time is set, if the type c USB cable Plug is not powered (do not pull out the USB), the next time you plug in the phone to charge, it is still the previously set charging time.
7. During charging, when the current is less than 60mA, the screen only shows the voltage, time two contents. When the current is less than 60mA for up to 1 minute, USB power off.
|Attribute||USB To Type-C Fast Charging Flat USB Data Cable with Digital LCD Display|
|Contact||Rachel He +8613823544100|
|Materials||Aluminum Alloy Housing and Nylon Braided|
Looking forward to your inquiry for this China OEM USB 2.0 To Type C Fast Charging Flat USB Data Cable with Digital LCD Display Manufacturer&Factory